Epsilon

All-in-one, now also available for wider belts. Up to 50% lighter, fast and easy to program.

- Very light.

- No need to carry additional control unit.

- Ultra-fast water cooling.

- Integrated pressure system.

- Wi-Control available.

Request a Quote

Technical Data
Further info
Accessories
Photos
Videos
Downloads

Material	Aluminium
Pressure	Airbags in upper & lower frame – 2 Bar (29PSI)
Heating	Silicone Heating elements - 200º C (392º F) Max.
Cooling	Water
Platen Length	160mm (6,3")
Belt Width	Up to 3600mm (141.7")
Angle	90º

Millimeters Inches

Model	Belt (mm) (mm)	G1 (mm) (in)	G3 (mm) (in)	A (mm) (in)	B (mm) (in)	D (mm) (in)	L (mm) (in)	Lower frame weight (Kg) (Lb)	Upper frame weight (Kg) (Lb)	Total weight (Kg) (Lb)
Epsilon 1600	1600 mm	217 mm	434 mm	1700 mm	160 mm	180 mm	1820 mm	42.4 Kg	46.8 Kg	89.2 Kg
Epsilon 1800	1800 mm	217 mm	434 mm	1900 mm	160 mm	180 mm	2020 mm	47.4 Kg	50.0 Kg	97.4 Kg
Epsilon 2000	2000 mm	267 mm	534 mm	2100 mm	160 mm	180 mm	2220 mm	57.0 Kg	59.5 Kg	116.5 Kg
Epsilon 2200	2200 mm	267 mm	534 mm	2300 mm	160 mm	180 mm	2420 mm	61.6 Kg	65.4 Kg	127.0 Kg
Epsilon 2400	2400 mm	260 mm	520 mm	2500 mm	160 mm	180 mm	2670 mm	85 Kg	80 Kg	165 Kg
Epsilon 2600	2600 mm	290 mm	580 mm	2700 mm	160 mm	180 mm	2880 mm	90 Kg	89 Kg	179 Kg
Epsilon 1600	1600 mm	8.54 in	17.09 in	66.93 in	6.30 in	7.09 in	71.65 in	93.28 Lb	102.96 Lb	196.24 Lb
Epsilon 1800	1800 mm	8.54 in	17.09 in	74.80 in	6.30 in	7.09 in	79.53 in	104.28 Lb	110.00 Lb	214.28 Lb
Epsilon 2000	2000 mm	10.51 in	21.02 in	82.68 in	6.30 in	7.09 in	87.40 in	125.40 Lb	130.90 Lb	256.30 Lb
Epsilon 2200	2200 mm	10.51 in	21.02 in	90.55 in	6.30 in	7.09 in	95.28 in	135.52 Lb	143.88 Lb	279.40 Lb
Epsilon 2400	2400 mm	10.24 in	20.47 in	98.43 in	6.30 in	7.09 in	105.12 in	187 Lb	176 Lb	363 Lb
Epsilon 2600	2600 mm	11.42 in	22.83 in	106.30 in	6.30 in	7.09 in	113.39 in	198 Lb	198.80 Lb	393.8 Lb

Check all the models

The technical data shown are subject to change without notice.

Description

Aluminium made press. Available for several belt widths: from 1600mm up to 3200mm (superior dimensions under request). Incorporates pneumatic pressure system, heating system, water cooling system and clamping bar. The press is divided into 2 parts (top and bottom). Each one incorporates extruded aluminium platens that include the silicone heating elements, pressure bag and temperature probes. Length of platen: 160mm. Completely automatic process programmed from the built-in controllers (pressure, heating, dwell time and cooling).

Controllers

Built in the frame of the press and easy to program. Automatic control of the whole process of joint, once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Automatic end-of-cycle buzzer.

Pressure System

The pressure is supplied equally by means of pressure bags. Maximum pressure: 2 bar. All the models include compressor, pressure switch and deaerator.

Heating system

Fast heating of both platens by means of silicone heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C.

Cooling system

Cooling system with water running through extruded platens. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling system activates automatically after dwell time.

Clamping system

Fixing the belt by means of automatic clamping bars. Two intermediate plates of galvanized steel (1,5 mm thickness) are also supplied for the protection of the heating plates. These plates also dissipate the heat and avoid marks on the splice area.

Bolts

Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).