Press for vulcanization of profiles on rubber conveyor belts.
- - Adjustable distance between sections.
- - Comfortable and easy handling.
- - Interchangeable moulds.
- - Independent programming of top and bottom temperatures.
- - Possibility of performing a standard splice.
Request a Quote
|Pressure||Hydraulic cylinders - 7 Bar (100 PSI)|
|Heating||Silicone Heating elements - 200º C (392º F) Max.|
|Belt width||Up to 1600mm|
|Model||Belt (mm) (in)||Z (mm) (in)||G1 (mm) (in)||G2 (mm) (in)||GP (mm) (in)||G3 (mm) (in)||A (mm) (in)||B (mm) (in)||C (mm) (in)||L (mm) (in)|
|Pamfe 1600||1600 mm||160 mm||460 mm||1000 mm||240 mm||1800 mm||1760 mm||2400 mm||3030 mm||3230 mm|
|Pamfe 1000||1000 mm||160 mm||460 mm||1000 mm||240 mm||1800 mm||1160 mm||1800 mm||1975 mm||3230 mm|
|Pamfe 1000||40 in||6.30 in||18.11 in||39.37 in||9.45 in||70.87 in||45.67 in||70.87 in||77.76 in||127.17 in|
|Pamfe 1600||40 in||6.30 in||18.11 in||39.37 in||9.45 in||70.87 in||69.29 in||94.49 in||101.38 in||127.17 in|
The technical data shown are subject to change without notice.
Workshop press made in steel and composed by sections. Available for different belt widths. The press incorporates hydraulic pressure system, heating system, cooling and purge system. Every section consists of top and bottom parts, with right angled aluminum platens that include silicone heating elements, cooling channels and temperature sensors. Length of the platen: 160mm 6,3”. Fully automatic process individually programmed (pressure, heating, dwell time and cooling). Security lock included.
Hydraulic lift up and put down process of every section.
Easy programming control unit. Fully automatic process once set temperature and dwell time have been selected. Automatic Temperature Regulation System included (ATRS). A voltmeter helps to detect any issue in the power supply.
Pressure is equally applied on the belt by means of hydraulic cylinders placed inside every section. Maximum pressure is 7 bar (100 PSI).
Individual control and regulation via digital display en every section, as well as indicators for end of cycle, emergency stop and lift up/put down.
Fast heating up of the platens thanks to the silicone heating elements. Each one is specially made with an asymmetrical wiring, to supply a uniform heat all along the belt. The heating elements warm more at the ends to compensate the temperature loss and also to avoid heat concentration in the middle part. Programmable temperatura up to 200ºC.
Water cooling system composed by water channels inside the aluminum platen, through which water is flown with a solenoid. It favours a rapid drop of the temperature and reduces waiting time for a new work. Cooling and water purge are activated automatically at the end of the cycle.
Easily adjustable. Aluminum made with a 2 safety factor (able to withstand twice the load pressure of the machine). Bolts can also be fixed on the top part of the section (option upon request).
No files currently available
Tools for rubber conveyor belts
Top quality set of tools for belt splicing...