Miniver MP
Miniver MP
Speed and comfort for on-site splice of transmission belts.
- - Light and easy to carry.
- - Fast cycles to provide ongoing works.
- - Belts without deformations, thanks to the lateral cooling system.
- - Automatic process.
Request a Quote
| Material | Aluminium |
| Heating | 200º C (392º F) max. |
| Pressure | Airbag |
| Cooling | Water |
| Model | G1 (mm) (in) | G2 (mm) (in) | G3 (mm) (in) | A (mm) (in) | B (mm) (in) | D (mm) (in) | L (mm) (in) | Lower frame weight (Kg) (Lb) | Upper frame weight (Kg) (Lb) | Total weight (Kg) (Lb) |
|---|---|---|---|---|---|---|---|---|---|---|
| Miniver MP-150 | 120 mm | 120 mm | 240 mm | 200 mm | 160 mm | 280 mm | 290 mm | 12.4 Kg | 10 Kg | 22.4 Kg |
The technical data shown are subject to change without notice.
Description
Portable press for transmission belts, manufactured in aluminium, with a 200x160 mm platen plus a safety margin for placing the moulds and the temperature diffuser. The press includes pneumatic pressure system by means of airbag, heating systems (cartridge heating elements) and cooling system (main and peripheral). It is composed by the frame, pneumatic airbag and heating platens. Each aluminium platen contains the heating elements, temperature testers, main cooling pipes and peripheral cooling pipes. Maximum belt width: 150mm. Joint Length of the platen: 160mm. Fully automatic process (heating, dwell time and peripheral & main cooling systems) programmed from the control unit.
Controllers
Easy to program control unit. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time and the cooling temperature (both central and double side ones). Includes a pressure regulator, manometer and pneumatic valve for inflation and deflation. Automatic end-of-cycle buzzer.
Pressure System
Pressure is applied with a pneumatic airbag on the bottom part of the press, and it is supplied equally all along the heating area. Maximum Pressure: 7 kg/cm2.
Heating System
Fast heating of both platens by means of interchangeable cartridge heaters that provide a uniform heat distribution all along the platen. Programmable platen up to 200º.
Cooling
Water cooled. The central cooling system (covers the whole platen) favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. It activates and stops automatically. It is composed by a stainless stell closed circuit that makes the water run all along the platen propelled by a water pump. The double side cooling system keeps both ends of the platen at a constant low temperature.
Moulds / Belt Clamps
Different options to splice timing belts. Aluminium made moulds with a design perfectly adapted to the shape of the belt for a result identical to the original one.
The belt clamps device allows a perfect adjustment of the flat belt before the splice. Furthermore, a second belt may also be prepared while the machine is working.
Connections
Electrical leads with industrial connectors and silicone water hoses resistant to high temperatures with fit couplings.
| Available Documents |
|---|
| Catalogue View PDF |
| Spec Sheet View PDF |
Miniver belt clamps
To prepare the belt for the joint.
