E-Komp

Compact Vulcanizer, fast and easy to install, with built-in controllers.

- No need to carry an external control unit.

- Up to 2 dwell temperature levels.

- Easily removable divided into 5 parts, reducing the weight load for the operator.

- 230V Single phase available.

- Low height frame for workspaces with difficult access.

- Wi-Control available.

Request a Quote

Technical Data
Further info
Accessories
Photos
Videos
Downloads

Material	Aluminium
Pressure	Airbag lower frame - 7 Bar (100PSI)
Heating	Silicone Heating elements - 185º C (365º F) Max.
Cooling	Water
Belt width	Up to 1600mm (60")
Platen Length	364mm-520mm-624mm-728mm-832mm-1664mm (14,8"-21,2"-25,5"-29,7"-32,7"-65,5")
Angle	16º - 22º - 90º

Millimeters Inches

Technical data in millimeters correspond to the 16º models, and in inches to the 22º ones. The weight of the lower frame includes the bolts and the pins. The total weight includes the 2 heating platens and the pressure bag.

Model	Belt (mm) (in)	G1 (mm) (in)	G3 (mm) (in)	A (mm) (in)	B (mm) (in)	C (mm) (in)	H (mm) (in)	Bottom frame weight (Kg) (Lb)	Top frame weight (Kg) (Lb)	Platen weight (Kg) (Lb)	Total weight (Kg) (Lb)
E-Komp 650x350	650 mm	184 mm	338 mm	780 mm	350 mm	750 mm	364 mm	28.5 Kg	22.6 Kg	20.1 Kg	95.7 Kg
E-Komp 1000x350	1000 mm	204 mm	378 mm	1145 mm	350 mm	1101 mm	364 mm	39.6 Kg	33.2 Kg	31.4 Kg	141.0 Kg
E-Komp 800x350	800 mm	194 mm	358 mm	940 mm	350 mm	904 mm	364 mm	33.4 Kg	27.2 Kg	24.6 Kg	114.4 Kg
E-Komp 1200x350	1200 mm	229 mm	428 mm	1355 mm	350 mm	1303 mm	364 mm	46.2 Kg	39.3 Kg	35.4 Kg	162.9 Kg
E-Komp 1400x350	1400 mm	249 mm	468 mm	1560 mm	350 mm	1500 mm	364 mm	56.2 Kg	45.2 Kg	40.8 Kg	190.6 Kg
E-Komp 1600x350	1600 mm	274 mm	518 mm	1770 mm	350 mm	1701 mm	364 mm	63.0 Kg	51.3 Kg	46.3 Kg	215.4 Kg
E-Komp 24x14	24 in	7.2 in	13.3 in	30.1 in	13.8 in	27.9 in	14.8 in	61.7 Lb	48.77 Lb	44.0 Lb	206.7 Lb
E-Komp 26x14	26 in	7.4 in	13.7 in	32.3 in	13.8 in	29.9 in	14.8 in	65.7 Lb	52.27 Lb	47.2 Lb	221.1 Lb
E-Komp 30x14	30 in	7.6 in	14.1 in	36.6 in	13.8 in	33.9 in	14.8 in	72.9 Lb	59.29 Lb	53.5 Lb	249.2 Lb
E-Komp 32x14	32 in	7.8 in	14.5 in	38.7 in	13.8 in	35.9 in	14.8 in	76.6 Lb	62.72 Lb	56.6 Lb	263.1 Lb
E-Komp 36x14	36 in	8.0 in	14.9 in	43.1 in	13.8 in	39.9 in	14.8 in	83.8 Lb	69.74 Lb	62.9 Lb	291.2 Lb
E-Komp 40x14	40 in	8.2 in	15.3 in	47.4 in	13.8 in	43.9 in	14.8 in	90.9 Lb	76.76 Lb	69.3 Lb	319.2 Lb

Check all the models

The technical data shown are subject to change without notice.

Description

Compact press made in aluminium. Available for several belt widths, from 650mm up to 1600mm. Lengths of platen 365mm, 522mm, 627mm and 728mm (14”, 21”, 25” y 29”). The vulcanizer includes pneumatic pressure system, heating system and cooling system. Removable divided into 5 parts (top frame, top platen, bottom platen, pressure bag and bottom frame) for ease of handling. Completely automatic process programmed from the built-in controllers (heating, dwell time and cooling).

Controllers

Built-in the frame and easy to program. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Automatic end-of-cycle buzzer.

Pressure System

The pressure is applied to the belt by means of a pressure bag. 7 bar (100PSI) maximum pressure.

Heating System

Fast heating of both platens by means of silicone heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.

Cooling System

Water cooling system composed by a closed stainless steel circuit, that helps water circulate all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. It activates automatically at the end of the dwell temperature process (Manually adjustable in 230V Single Phase version)

Electrical Configuration

In addition to our standard 400V III phases configuration, E-Komp is also available 230V Single phase (with one power lead per platen). For further electrical configurations, please, ask our sales department.

Bolts

Perfect assembly of the top and bottom frames. Steel made. Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).