Delta AR
Delta AR
Suitable for different jobs: belts, tubes and flat timing belts.
- - Narrow perimeter.
- - Easy handling for a single operator.
- - Ongoing works.
- - Different lengths of platen: 60, 100 and 150mm
Request a Quote
| Material | Steel |
| Pressure | Airbag - 3 Bar (43PSI) |
| Heating | Heating Elements - 200º C (392ºF) max. |
| Cooling | Water |
| Belt Width | Up to 1500mm (59") |
| Platen Length | 60mm (2,3") - 100mm (3,9") - 150mm (5,9") |
| Angle | 90º |
| Model | Belt (mm) (mm) | G1 (mm) (in) | GS (mm) (in) | G3 (mm) (in) | A (mm) (in) | B (mm) (in) | D (mm) (in) | L (mm) (in) | Bottom perimeter (mm) (in) | Total weight (Kg) (Lb) |
|---|---|---|---|---|---|---|---|---|---|---|
| Delta AR 300x60 | 300 mm | 92 mm | 118 mm | 184 mm | 430 mm | 60 mm | 162 mm | 705 mm | 380 mm | 25 Kg |
| Delta AR 300x100 | 300 mm | 92 mm | 118 mm | 184 mm | 430 mm | 100 mm | 202 mm | 705 mm | 460 mm | 49 Kg |
| Delta AR 300x150 | 300 mm | 92 mm | 118 mm | 184 mm | 430 mm | 150 mm | 252 mm | 710 mm | - mm | 77 Kg |
| Delta AR 400x60 | 400 mm | 92 mm | 118 mm | 184 mm | 530 mm | 60 mm | 162 mm | 805 mm | 380 mm | 29 Kg |
| Delta AR 400x100 | 400 mm | 92 mm | 118 mm | 184 mm | 530 mm | 100 mm | 202 mm | 805 mm | 460 mm | 52 Kg |
| Delta AR 400x150 | 400 mm | 92 mm | 118 mm | 184 mm | 530 mm | 150 mm | 252 mm | 810 mm | - mm | 80 Kg |
| Delta AR 300x60 | 300 mm | 3.6 in | 4.7 in | 7.2 in | 16.9 in | 2.4 in | 6.4 in | 27.8 in | 14.96 in | 55.0 Lb |
| Delta AR 300x100 | 300 mm | 3.6 in | 4.7 in | 7.2 in | 16.9 in | 3.9 in | 8.0 in | 27.8 in | 18.11 in | 107.8 Lb |
| Delta AR 300x150 | 300 mm | 3.6 in | 4.7 in | 7.2 in | 16.9 in | 5.9 in | 9.9 in | 28.0 in | - in | 169.4 Lb |
| Delta AR 400x60 | 400 mm | 3.6 in | 4.7 in | 7.2 in | 20.9 in | 2.4 in | 6.4 in | 31.7 in | 14.96 in | 63.8 Lb |
| Delta AR 600x150 | 600 mm | 3.6 in | 4.7 in | 7.2 in | 28.7 in | 5.9 in | 9.9 in | 39.8 in | - in | 191.4 Lb |
| Delta AR 600x100 | 600 mm | 3.6 in | 4.7 in | 7.2 in | 28.7 in | 3.9 in | 8.0 in | 39.6 in | 18.11 in | 129.8 Lb |
The technical data shown are subject to change without notice.
Description
Aluminium made press. Available for several belt widths: from 300mm up to 1500mm. Incorporates pneumatic pressure system, heating system, water cooling system and clamping bar (depending on the model). The press is divided into 2 parts (top and bottom). Each integrates aluminium platens with heating elements, cooling pipes and temperature probes. Length of platen: 60 mm, 100mm or 150mm. Completely automatic process programmed from the control unit (pressure, heating, dwell time and cooling).
Lifting system
Manual lifting of the top part by means of tension springs, to counterbalance the weight of that part and to provide resistance to the bolt.
Controllers
Easy to program control unit. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. The control box features an Automatic Temperature Regulation System (ATRS), that monitors automatically the differences of temperature between the heating platens during heating and dwell time. By doing so, differences of more than 2ºC are avoided. Includes voltmeter for input voltage reading that allows to detect any problem in the power supply. Includes also a pressure regulator, manometer and pneumatic valve with quick inflation and deflation. Automatic end-of-cycle buzzer.
Pressure System
The pressure is supplied equally by means of wide section airbags inside each frame.3 bar maximum pressure.
Heating System
Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.
Cooling
Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling system activates automatically after dwell time finishes.
Clamping System
Fixing the belt by means of automatic clamping bars. Two intermediate plates of galvanized steel (1,5 mm thickness) are also supplied for the protection of the heating plates. These plates also dissipate the heat and avoid marks on the splice area.
Bolts
Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).
No videos currently available
| Available Documents |
|---|
| Spec Sheet View PDF |
