Delta

No limits. Light and ultra flat for splices on the own belt conveyor. Water cooled for continued work

- Exceptional low profile.

- Ongoing works without breaks.

- Control unit with ATRS.

- 3 bar maximum pressure.

Request a Quote

Technical Data
Further info
Accessories
Photos
Videos
Downloads

Material	Steel
Pressure	Airbag upper frame - 3 Bar (43PSI)
Heating	Heating Elements - 200º C (392ºF) Max.
Cooling	Water
Belt Width	Up to 1000mm (39,3")
Platen length	150mm (5,9")
Angle	90º

Millimeters Inches

Model	Belt (mm) (mm)	G1 (mm) (in)	G2 (mm) (in)	G3 (mm) (in)	A (mm) (in)	B (mm) (in)	D (mm) (in)	L (mm) (in)	Lower frame weight (Kg) (Lb)	Upper frame weight (Kg) (Lb)	Total weight (Kg) (Lb)
Delta 200	200 mm	54 mm	64 mm	118 mm	330 mm	150 mm	232 mm	410 mm	10 Kg	10 Kg	20 Kg
Delta 300	300 mm	54 mm	64 mm	118 mm	430 mm	150 mm	232 mm	510 mm	11 Kg	11 Kg	22 Kg
Delta 400	400 mm	54 mm	64 mm	118 mm	530 mm	150 mm	232 mm	610 mm	14 Kg	14 Kg	28 Kg
Delta 600	600 mm	54 mm	64 mm	118 mm	730 mm	150 mm	232 mm	810 mm	18 Kg	18 Kg	36 Kg
Delta 800	800 mm	64 mm	64 mm	128 mm	930 mm	150 mm	232 mm	1010 mm	25 Kg	25 Kg	50 Kg
Delta 1000	1000 mm	84 mm	84 mm	168 mm	1200 mm	150 mm	232 mm	1280 mm	31 Kg	31 Kg	62 Kg
Delta 200	200 mm	2.0 in	2.4 in	4.6 in	13.0 in	5.9 in	9.1 in	16.1 in	22.0 Lb	22.0 Lb	44.0 Lb
Delta 300	300 mm	2.0 in	2.4 in	4.6 in	16.9 in	5.9 in	9.1 in	20.1 in	24.2 Lb	24.2 Lb	48.4 Lb
Delta 400	400 mm	2.0 in	2.4 in	4.6 in	20.9 in	5.9 in	9.1 in	24.0 in	30.8 Lb	30.8 Lb	61.6 Lb
Delta 600	600 mm	2.0 in	2.4 in	4.6 in	28.7 in	5.9 in	9.1 in	31.9 in	39.6 Lb	39.6 Lb	79.2 Lb
Delta 800	800 mm	2.4 in	2.4 in	5.0 in	36.6 in	5.9 in	9.1 in	39.8 in	55.0 Lb	55.0 Lb	110.0 Lb
Delta 1000	1000 mm	3.1 in	3.1 in	6.6 in	47.2 in	5.9 in	9.1 in	50.4 in	68.2 Lb	68.2 Lb	136.4 Lb

The technical data shown are subject to change without notice.

Description

Steel made. Available for 6 different belt widths: 200, 300, 400, 600, 800 and 1000mm. Incorporates pneumatic pressure system, heating system, water cooling system and clamping bar. The press is divided into 2 parts (top and bottom). Each integrates aluminium platens with heating elements, cooling pipes and temperature probes. Length of platen: 150mm Completely automatic process programmed from the control unit (pressure, heating, dwell time and cooling).

Controllers

Easy to program control unit. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. The control box features an Automatic Temperature Regulation System (ATRS), that monitors automatically the differences of temperature between the heating platens during heating and dwell time. By doing so, differences of more than 2ºC are avoided. Includes voltmeter for input voltage reading that allows to detect any problem in the power supply. Includes also a pressure regulator, manometer and pneumatic valve with quick inflation and deflation. Automatic end-of-cycle buzzer. The control unit of Delta 1000 has built-in controllers for pressure.

Pressure System

The pressure is supplied equally by means of a wide section airbag inside the top frame. 3 Bar maximum pressure. All the models include on the top frame: pressure regulator, manometer and manual switch, but Delta 1000.

Heating system

Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.

Cooling system

Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling system activates automatically after dwell time finishes.

Clamping System

Fixing the belt by means of automatic clamping bars. Two intermediate plates of galvanized steel (1,5 mm thickness) are also supplied for the protection of the heating plates. These plates also dissipate the heat and avoid marks on the splice area.

Bolts

Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).