Compact Vulcanizer, fast and easy to install.
- - Easily removable divided into 5 parts, reducing the weight load for the operator.
- - Fast and automatic process.
- - Low height frame for workspaces with difficult access.
- - External control unit.
Request a Quote
|Pressure||Airbag lower frame - 7 Bar (100PSI)|
|Heating||Heating elements - 185º C (365º F) Max.|
|Belt width||Up to 1800mm (72")|
|Platen Length||364mm-520mm-624mm-728mm-832mm-1664mm (14,8"-21,2"-25,5"-29,7"-32,7"-65,5")|
|Angle||16º - 22º - 90º|
|Model||Belt (mm) (in)||G1 (mm) (in)||G3 (mm) (in)||A (mm) (in)||B (mm) (in)||C (mm) (in)||H (mm) (in)||L (mm) (in)||Bottom frame weight (Kg) (Lb)||Top frame weight (Kg) (Lb)||Platen weight (Kg) (Lb)||Total weight (Kg) (Lb)|
|Komp 650x350||650 mm||181 mm||332 mm||780 mm||350 mm||750 mm||364 mm||960 mm||29.4 Kg||21.5 Kg||19.88 Kg||95.51 Kg|
|Komp 800x350||800 mm||191 mm||352 mm||940 mm||350 mm||904 mm||364 mm||1120 mm||35.3 Kg||26 Kg||22 Kg||109 Kg|
|Komp 1000x350||1000 mm||201 mm||372 mm||1145 mm||350 mm||1101 mm||364 mm||1325 mm||41.5 Kg||31.5 Kg||30.5 Kg||142.5 Kg|
|Komp 1200x350||1200 mm||226 mm||422 mm||1355 mm||350 mm||1303 mm||364 mm||1535 mm||53.0 Kg||40 Kg||36 Kg||175 Kg|
|Komp 1400x350||1400 mm||246 mm||462 mm||1560 mm||350 mm||1500 mm||364 mm||1740 mm||62.8 Kg||38.64 Kg||39.77 Kg||190.68 Kg|
|Komp 1600x350||1600 mm||271 mm||512 mm||1770 mm||350 mm||1701 mm||364 mm||1950 mm||79.1 Kg||59.13 Kg||45.12 Kg||239.52 Kg|
|Komp 24x14||24 in||7.1 in||13.1 in||30.1 in||13.8 in||27.9 in||14.8 in||37.2 in||63.8 Lb||46.20 Lb||42.9 Lb||204.6 Lb|
|Komp 26x14||26 in||7.3 in||13.5 in||32.3 in||13.8 in||29.9 in||14.8 in||39.4 in||68.3 Lb||50.03 Lb||46.0 Lb||221.5 Lb|
|Komp 30x14||30 in||7.5 in||13.9 in||36.6 in||13.8 in||33.9 in||14.8 in||43.7 in||70.4 Lb||56.74 Lb||52.2 Lb||244.2 Lb|
|Komp 32x14||32 in||7.7 in||14.3 in||38.7 in||13.8 in||35.9 in||14.8 in||45.8 in||80.2 Lb||59.40 Lb||53.9 Lb||257.0 Lb|
|Komp 36x14||36 in||7.9 in||14.6 in||43.1 in||13.8 in||39.9 in||14.8 in||50.2 in||88.0 Lb||66.29 Lb||61.4 Lb||292.0 Lb|
|Komp 40x14||40 in||8.1 in||15.0 in||47.4 in||13.8 in||43.9 in||14.8 in||54.5 in||96.8 Lb||72.60 Lb||67.5 Lb||325.6 Lb|
The technical data shown are subject to change without notice.
Compact press made in aluminium. Available for several belt widths, from 650mm up to 1600mm. Lengths of platen 365mm, 522mm, 627mm, 728mm, 832mm and 1664mm (14”, 21”, 25”, 29”, 32,7' and 65,6'). The vulcanizer includes pneumatic pressure system, heating system and cooling system. Removable divided into 5 parts (top frame, top platen, bottom platen, pressure bag and bottom frame) for ease of handling. Completely automatic process programmed from control unit (heating, dwell time and cooling).
Easy to program control unit. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. The control box features an Automatic Temperature Regulation System (ATRS), that monitors automatically the differences of temperature between the heating platens during heating and dwell time. By doing so, differences of more than 2ºC are avoided. Includes voltmeter for input voltage reading that allows to detect any problem in the power supply. Includes also a pressure regulator, manometer and pneumatic valve with quick inflation and deflation. Automatic end-of-cycle buzzer.
Pressure system with wide section pressure bag
The pressure is applied to the belt by means of a pressure bag. 7 bar (100PSI) maximum pressure.
Fast heating of both platens by means of silicone heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.
Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. It activates automatically at the end of the dwell temperature process.
Perfect assembly of the top and bottom frames. Steel made. Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).
It generates a secure network, to which it...
Komp control box
Easy to program control unit.
Automatic control of the...
Case with electrical leads, water hoses and the...
Submersible Pump, for the cooling of the heating...
Portable Water reservoir for cooling.
19.5 litres of water reservoir to boost water...
10 Bar Compressor
10 Bar Piston Compressor of small size, with...
Tools for rubber conveyor belts
Top quality tools for belt splicing preparation. Further info