E-Komp - Portable presses - Water-cooled


Compact Vulcanizer, fast and easy to install, with built-in controllers.

  • - No need to carry an external control unit.
  • - Up to 2 dwell temperature levels.
  • - Easily removable divided into 5 parts, reducing the weight load for the operator.
  • - 230V Single phase available.
  • - Low height frame for workspaces with difficult access.
  • - Wi-Control available.

Request a Quote
  • Technical Data
  • Further info
  • Accessories
  • Photos
  • Downloads
PressureAirbag lower frame - 7 Bar (100PSI)
HeatingSilicone Heating elements - 185º C (365º F) Max.
Belt widthUp to 1600mm (60")
Platen Length364mm-520mm-624mm-728mm-832mm-1664mm (14,8"-21,2"-25,5"-29,7"-32,7"-65,5")
Angle16º - 22º - 90º

Millimeters Inches

Technical data in millimeters correspond to the 16º models, and in inches to the 22º ones. The weight of the lower frame includes the bolts and the pins. The total weight includes the 2 heating platens and the pressure bag.
Model Belt (mm) (in)G1 (mm) (in)G3 (mm) (in)A (mm) (in)B (mm) (in)C (mm) (in)H (mm) (in)Bottom frame weight (Kg) (Lb)Top frame weight (Kg) (Lb)Platen weight (Kg) (Lb)Total weight (Kg) (Lb)
E-Komp 650x350650 mm184 mm338 mm780 mm350 mm750 mm364 mm28.5 Kg22.6 Kg20.1 Kg95.7 Kg
E-Komp 1000x3501000 mm204 mm378 mm1145 mm350 mm1101 mm364 mm39.6 Kg33.2 Kg31.4 Kg141.0 Kg
E-Komp 800x350800 mm194 mm358 mm940 mm350 mm904 mm364 mm33.4 Kg27.2 Kg24.6 Kg114.4 Kg
E-Komp 1200x3501200 mm229 mm428 mm1355 mm350 mm1303 mm364 mm46.2 Kg39.3 Kg35.4 Kg162.9 Kg
E-Komp 1400x3501400 mm249 mm468 mm1560 mm350 mm1500 mm364 mm56.2 Kg45.2 Kg40.8 Kg190.6 Kg
E-Komp 1600x3501600 mm274 mm518 mm1770 mm350 mm1701 mm364 mm63.0 Kg51.3 Kg46.3 Kg215.4 Kg
E-Komp 24x1424 in7.2 in13.3 in30.1 in13.8 in27.9 in14.8 in61.7 Lb48.77 Lb44.0 Lb206.7 Lb
E-Komp 26x1426 in7.4 in13.7 in32.3 in13.8 in29.9 in14.8 in65.7 Lb52.27 Lb47.2 Lb221.1 Lb
E-Komp 30x1430 in7.6 in14.1 in36.6 in13.8 in33.9 in14.8 in72.9 Lb59.29 Lb53.5 Lb249.2 Lb
E-Komp 32x1432 in7.8 in14.5 in38.7 in13.8 in35.9 in14.8 in76.6 Lb62.72 Lb56.6 Lb263.1 Lb
E-Komp 36x1436 in8.0 in14.9 in43.1 in13.8 in39.9 in14.8 in83.8 Lb69.74 Lb62.9 Lb291.2 Lb
E-Komp 40x1440 in8.2 in15.3 in47.4 in13.8 in43.9 in14.8 in90.9 Lb76.76 Lb69.3 Lb319.2 Lb

Check all the models

The technical data shown are subject to change without notice.


Compact press made in aluminium. Available for several belt widths, from 650mm up to 1600mm. Lengths of platen 365mm, 522mm, 627mm and 728mm (14”, 21”, 25” y 29”). The vulcanizer includes pneumatic pressure system, heating system and cooling system. Removable divided into 5 parts (top frame, top platen, bottom platen, pressure bag and bottom frame) for ease of handling. Completely automatic process programmed from the built-in controllers (heating, dwell time and cooling).


Built-in the frame and easy to program. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Automatic end-of-cycle buzzer.

Pressure System

The pressure is applied to the belt by means of a pressure bag. 7 bar (100PSI) maximum pressure.

Heating System

Fast heating of both platens by means of silicone heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.

Cooling System

Water cooling system composed by a closed stainless steel circuit, that helps water circulate all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. It activates automatically at the end of the dwell temperature process (Manually adjustable in 230V Single Phase version) 

Electrical Configuration

In addition to our standard 400V III phases configuration, E-Komp is also available 230V Single phase (with one power lead per platen). For further electrical configurations, please, ask our sales department.


Perfect assembly of the top and bottom frames. Steel made. Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).

E-Komp - Portable presses - Water-cooled
E-Komp - Portable presses - Water-cooled
E-Komp - Portable presses - Water-cooled
E-Komp - Portable presses - Water-cooled
E-Komp - Portable presses - Water-cooled

No videos currently available

Available Documents
Spec Sheet   View PDF
Catalogue   View PDF


The presses equipped with Wi-Control generates a secure...

Further info



Case with electrical leads, water hoses and the...

Further info

Cooling Pump

Cooling Pump

Submersible Pump, for the cooling of the heating...

Further info

Portable Water reservoir for cooling.

Portable Water reservoir for cooling.

19.5 litres of water reservoir to boost water...

Further info

10 Bar Compressor

10 Bar Compressor

10 Bar Piston Compressor of small size, with...

Further info

Tools for rubber conveyor beltsTools for rubber conveyor beltsTools for rubber conveyor beltsTools for rubber conveyor belts

Tools for rubber conveyor belts

Top quality tools for belt splicing preparation. Further info




Send us your inquiry and we will contact you as soon as possible.

Name *
Country *
Email *
Phone Number
Message *
Send Close

Please, complete all the required fields *

The e-mail address supplied is not correct.