The most efficient manner of joining transmission belts
- - Compact size press.
- - Fast cycles for ongoing works.
- - Side cooling avoids deformations.
- - Narrow perimeter.
- - Automatic process.
Request a Quote
|Model||G1 (mm) (in)||G3 (mm) (in)||A (mm) (in)||B (mm) (in)||D (mm) (in)||L (mm) (in)||Total weight (Kg) (Lb)|
|Miniver 75||110 mm||697 mm||120 mm||80 mm||160 mm||325 mm||31 Kg|
|Miniver 150||150 mm||837 mm||200 mm||140 mm||270 mm||465 mm||66 Kg|
|Miniver 200||180 mm||925 mm||250 mm||200 mm||330 mm||540 mm||110 Kg|
|Miniver 320||216 mm||945 mm||400 mm||210 mm||340 mm||950 mm||217 Kg|
|Miniver 520||227 mm||1004 mm||600 mm||210 mm||340 mm||1210 mm||365 Kg|
|Miniver 75||4.33 in||27.44 in||4.72 in||3.15 in||6.30 in||12.80 in||68.20 Lb|
|Miniver 150||5.91 in||32.95 in||7.87 in||5.51 in||10.63 in||18.31 in||145.20 Lb|
|Miniver 200||7.09 in||36.42 in||9.84 in||7.87 in||12.99 in||21.26 in||242.00 Lb|
|Miniver 320||8.50 in||37.20 in||15.75 in||8.27 in||13.39 in||37.40 in||478.40 Lb|
|Miniver 520||8.94 in||39.53 in||23.62 in||8.27 in||13.39 in||47.64 in||803.00 Lb|
The technical data shown are subject to change without notice.
Steel workshop press for transmission belts. The dimensions of the plates depend on the width of the belt and goes from 10mm up to 520mm, plus a safety margin for the location of the moulds and the heat distribution. The press incorporates pneumatic pressure system (cylinder), heating system (cartridge heaters) and cooling systems (central and double-side one). Composed by frame, pneumatic cylinder, extractable tray, nylon plate and heating plates. Each aluminium plate holds the heaters, temperature probes, central cooling system and double side cooling system. Maximum belt width: 520mm (M520); 320mm (M 320); 200mm (M200); 150mm (M150); 75mm (M75). Length of platen: 210mm (M 520 and M 320); 200 mm (M200); 140 mm (M150); 80 mm (M75). Completely automatic process (heating, dwell time and central and double side cooling) programmed from the control unit.
Easy to program control unit. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature (both central and double side ones) and the pressure have been set. Automatic end-of-cycle buzzer.
The pressure is applied equally all along the platen by means of a pneumatic cylinder. Inlet pressure regulator to select the mains pressure. Release/engagement device. Fast inflation/deflation thanks to the selector lever on the back of the control unit. Maximum pressure: 452 daN (M75); 1104 daN (M150); 1810 daN (M200).
Fast heating of both platens by means of interchangeable cartridge heaters that provide a uniform heat distribution all along the platen. Programmable platen up to 200º.
Water cooled. The central cooling system (covers the whole platen) favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. It activates and stops automatically. It is composed by a stainless stell closed circuit that makes the water run all along the platen propelled by a water pump. The double side cooling system keeps both ends of the platen at a constant low temperature.
Moulds / Belt clamps
Different option to splice timing belts. Aluminium made moulds with a design perfectly adapted to the shape of the belt for a result identical to the original one.
The belt clamps device allows a perfect adjustment of the flat belt before the splice. Furthermore, a second belt may also be prepared while the machine is working.
Electrical leads with industrial connectors and silicone water hoses resistant to high temperatures with fit couplings.
Submersible Pump, for the cooling of the heating...
Stand to enable the use of the press...
Aluminium made with the same pitch of the...
Device for the supply of water from the...