Comfort, safety and performance even for the widest belts in the market.
- - Easy handling for a single operator.
- - Extra safety: several prevention devices.
- - Ongoing works.
- - Two pressure bags, perfect for large belt widths.
Request a Quote
|Pressure||Airbags in upper & lower frame – 3 Bar (43PSI) or 5 Bar (72PSI) versions|
|Heating||Heating elements - 200º C (392ºF) Max.|
|Belt Width||Up to 5800mm (228,3")|
|Platen Length||150mm (5,9") or 200mm (7,8")|
|Model||Belt (mm) (mm)||G1 (mm) (in)||G2 (mm) (in)||G3 (mm) (in)||A (mm) (in)||B (mm) (in)||D (mm) (in)||L (mm) (in)||Total weight (Kg) (Lb)|
|Alfa AR 1200||1200 mm||145 mm||145 mm||290 mm||1360 mm||200 mm||420 mm||2000 mm||460.0 Kg|
|Alfa AR 1400||1400 mm||255 mm||255 mm||510 mm||1560 mm||200 mm||420 mm||2200 mm||510.0 Kg|
|Alfa AR 1600||1600 mm||255 mm||255 mm||510 mm||1760 mm||200 mm||420 mm||2400 mm||560.0 Kg|
|Alfa AR 1800||1800 mm||255 mm||255 mm||510 mm||1960 mm||200 mm||420 mm||2600 mm||610.0 Kg|
|Alfa AR 2000||2000 mm||255 mm||255 mm||510 mm||2160 mm||200 mm||420 mm||2800 mm||660.0 Kg|
|Alfa AR 2200||2200 mm||325 mm||325 mm||650 mm||2360 mm||200 mm||430 mm||3000 mm||810.0 Kg|
|Alfa AR 1200||1200 mm||5.7 in||5.7 in||11.4 in||53.5 in||7.9 in||16.5 in||78.7 in||1012.0 Lb|
|Alfa AR 1600||1600 mm||10.0 in||10.0 in||20.1 in||69.3 in||7.9 in||16.5 in||94.5 in||1232.0 Lb|
|Alfa AR 1400||1400 mm||10.0 in||10.0 in||20.1 in||61.4 in||7.9 in||16.5 in||86.6 in||1122.0 Lb|
|Alfa AR 1800||1800 mm||10.0 in||10.0 in||20.1 in||77.2 in||7.9 in||16.5 in||102.4 in||1342.0 Lb|
|Alfa AR 2000||2000 mm||10.0 in||10.0 in||20.1 in||85.0 in||7.9 in||16.5 in||110.2 in||1452.0 Lb|
|Alfa AR 2200||2200 mm||12.8 in||12.8 in||25.6 in||92.9 in||7.9 in||16.9 in||118.1 in||1782.0 Lb|
The technical data shown are subject to change without notice.
Aluminium made press. Available for several belt widths: from 1400mm up to 6000mm (superior dimensions under request). Incorporates pneumatic pressure system, heating system, water cooling + blowing system and clamping bar. The press is divided into 2 parts (top and bottom). Each integrates aluminium platens with heating elements, cooling pipes and temperature probes. Length of platen: 150mm or 200mm. Completely automatic process programmed from the control unit (pressure, heating, dwell time and cooling).
From the two-hand operator desk the top part of the press may be lifted up. Incorporates a fall-protection system and an air-lock system. The guide pin correctly centers top and bottom parts during lowering the first one.
Easy to program control unit. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. The control box features an Automatic Temperature Regulation System (ATRS), that monitors automatically the differences of temperature between the heating platens during heating and dwell time. By doing so, differences of more than 2ºC are avoided. Includes voltmeter for input voltage reading that allows to detect any problem in the power supply. Includes also a pressure regulator, manometer and pneumatic valve with quick inflation and deflation. Automatic end-of-cycle buzzer.
The pressure is supplied equally by means of a wide section airbag inside each frame. Depending on the maximum pressure to reach, there are 2 models: 3 bar or 5 bar. The weights and heights of the sections may vary depending on this.
Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.
Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling system activates automatically after dwell time finishes.
Fixing the belt by means of automatic clamping bars. Two intermediate plates of galvanized steel (1,5 mm thickness) are also supplied for the protection of the heating plates. These plates also dissipate the heat and avoid marks on the splice area.
Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).
For operating lifting up and lowering the top...
Alfa control unit
Easy to program control unit. Automatic control of...
Case with electrical leads, water hoses and the...
Submersible Pump, for the cooling of the heating...
Device for the supply of water from the...
Electric Pump for the supply of hydraulic presure...
Stand for the easy handling of the press...