No limits. Light and ultra flat for splices on the own belt conveyor. Water cooled for continued work
- - Exceptional low profile.
- - Ongoing works without breaks.
- - Control unit with ATRS.
- - 3 bar maximum pressure.
Request a Quote
|Pressure||Airbag upper frame - 3 Bar (43PSI)|
|Heating||Heating Elements - 200º C (392ºF) Max.|
|Belt Width||Up to 1000mm (39,3")|
|Platen length||150mm (5,9")|
|Model||Belt (mm) (mm)||G1 (mm) (in)||G2 (mm) (in)||G3 (mm) (in)||A (mm) (in)||B (mm) (in)||D (mm) (in)||L (mm) (in)||Lower frame weight (Kg) (Lb)||Upper frame weight (Kg) (Lb)||Total weight (Kg) (Lb)|
|Delta 200||200 mm||54 mm||64 mm||118 mm||330 mm||150 mm||232 mm||410 mm||10 Kg||10 Kg||20 Kg|
|Delta 300||300 mm||54 mm||64 mm||118 mm||430 mm||150 mm||232 mm||510 mm||11 Kg||11 Kg||22 Kg|
|Delta 400||400 mm||54 mm||64 mm||118 mm||530 mm||150 mm||232 mm||610 mm||14 Kg||14 Kg||28 Kg|
|Delta 600||600 mm||54 mm||64 mm||118 mm||730 mm||150 mm||232 mm||810 mm||18 Kg||18 Kg||36 Kg|
|Delta 800||800 mm||64 mm||64 mm||128 mm||930 mm||150 mm||232 mm||1010 mm||25 Kg||25 Kg||50 Kg|
|Delta 1000||1000 mm||84 mm||84 mm||168 mm||1200 mm||150 mm||232 mm||1280 mm||31 Kg||31 Kg||62 Kg|
|Delta 200||200 mm||2.0 in||2.4 in||4.6 in||13.0 in||5.9 in||9.1 in||16.1 in||22.0 Lb||22.0 Lb||44.0 Lb|
|Delta 300||300 mm||2.0 in||2.4 in||4.6 in||16.9 in||5.9 in||9.1 in||20.1 in||24.2 Lb||24.2 Lb||48.4 Lb|
|Delta 400||400 mm||2.0 in||2.4 in||4.6 in||20.9 in||5.9 in||9.1 in||24.0 in||30.8 Lb||30.8 Lb||61.6 Lb|
|Delta 600||600 mm||2.0 in||2.4 in||4.6 in||28.7 in||5.9 in||9.1 in||31.9 in||39.6 Lb||39.6 Lb||79.2 Lb|
|Delta 800||800 mm||2.4 in||2.4 in||5.0 in||36.6 in||5.9 in||9.1 in||39.8 in||55.0 Lb||55.0 Lb||110.0 Lb|
|Delta 1000||1000 mm||3.1 in||3.1 in||6.6 in||47.2 in||5.9 in||9.1 in||50.4 in||68.2 Lb||68.2 Lb||136.4 Lb|
The technical data shown are subject to change without notice.
Steel made. Available for 6 different belt widths: 200, 300, 400, 600, 800 and 1000mm. Incorporates pneumatic pressure system, heating system, water cooling system and clamping bar. The press is divided into 2 parts (top and bottom). Each integrates aluminium platens with heating elements, cooling pipes and temperature probes. Length of platen: 150mm Completely automatic process programmed from the control unit (pressure, heating, dwell time and cooling).
Easy to program control unit. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. The control box features an Automatic Temperature Regulation System (ATRS), that monitors automatically the differences of temperature between the heating platens during heating and dwell time. By doing so, differences of more than 2ºC are avoided. Includes voltmeter for input voltage reading that allows to detect any problem in the power supply. Includes also a pressure regulator, manometer and pneumatic valve with quick inflation and deflation. Automatic end-of-cycle buzzer. The control unit of Delta 1000 has built-in controllers for pressure.
The pressure is supplied equally by means of a wide section airbag inside the top frame. 3 Bar maximum pressure. All the models include on the top frame: pressure regulator, manometer and manual switch, but Delta 1000.
Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.
Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling system activates automatically after dwell time finishes.
Fixing the belt by means of automatic clamping bars. Two intermediate plates of galvanized steel (1,5 mm thickness) are also supplied for the protection of the heating plates. These plates also dissipate the heat and avoid marks on the splice area.
Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).
No videos currently available
Delta control unit
Easy to program control unit.
Automatic control of the...
Case with electrical leads, water hoses and the...
Submersible Pump, for the cooling of the heating...
Manual pressure pump
Light device for the supply of air to...
Portable Water reservoir for cooling.
19.5 litres of water reservoir to boost water...
Cooling and water-removal system
Device for the supply and expelling of water...
Stand for the easy handling of the press...