Spot repair press.
- - Available for up to 1600mm wide belts.
- - Removable platens for easier handling
- - Automatic control unit.
- - Water cooled.
Request a Quote
|Heating||Heating Elements - 185º C (365º F) Max.|
|Pressure||Pressure bag (Air/Water) - 5 Bar (75 PSI)|
|Repairable area||Up to 300x300mm|
|Model||G1 (mm) (in)||GCP (mm) (in)||G3 (mm) (in)||A (mm) (in)||B (mm) (in)||L (mm) (in)||Total weight (Kg) (Lb)|
|Repce 800||175 mm||98 mm||650 mm||300 mm||300 mm||917 mm||52 Kg|
|Repce 1000||175 mm||98 mm||660 mm||300 mm||300 mm||1017 mm||59 Kg|
|Repce 1200||175 mm||98 mm||670 mm||300 mm||300 mm||1117 mm||65 Kg|
|Repce 1400||175 mm||98 mm||680 mm||300 mm||300 mm||1217 mm||74 Kg|
|Repce 1600||175 mm||98 mm||700 mm||300 mm||300 mm||1317 mm||81 Kg|
|Repce 32||6.89 in||3.86 in||25,59 in||11,81 in||11.81 in||36,10 in||114,40 Lb|
|Repce 36||6.89 in||3.86 in||25,59 in||11,81 in||11.81 in||40,04 in||129,80 Lb|
|Repce 48||6.89 in||3.86 in||26,38 in||11,81 in||11.81 in||43,98 in||143,00 Lb|
|Repce 54||6.89 in||3.86 in||26.77 in||11.81 in||11.81 in||47.91 in||158,40 Lb|
|Repce 60||6.89 in||3.86 in||27.56 in||11.81 in||11.81 in||51.85 in||173,80 Lb|
The technical data shown are subject to change without notice.
Spot repair press. Aluminium made. Available for several belt widths up to 1400mm (superior dimensions under request). The vulcanizer includes pneumatic pressure system, heating system and cooling system. The vulcanizing area is composed by 2 heating platens that hold the heating elements, the temperature probes and the cooling pipes. Quickly removable to make handling easier. Completely automatic process programmed from the control unit (heating, dwell time and cooling).
Easy programming. Automatic control of the whole splicing process, once the melting temperature, the dwell time and the cooling temperature have been set. Incorporates one thermometer and one ammeter per section. The ammeter allows the identification of possible problems in the electrical system of the vulcanizer, besides a voltmeter for input voltage reading that allows to detect any problem in the power supply. Automatic end-of-cycle buzzer.
The pressure is applied to the belt by means of a pressure bag (air/water), of the same dimensions of the heating platens. Maximum pressure 5 bar (75PSI).
Fast heating of the platens (300x300mm) by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.
Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling system activates automatically after dwell time finishes.
No videos currently available
|Catalogue View PDF|
|Spec Sheet View PDF|
Repce control unit
Easy to program control unit.
Automatic control of the...
Submersible Pump, for the cooling of the heating...
10 Bar Compressor
10 Bar Piston Compressor of small size, with...