Repce Vigas

Repce Vigas - Vulcanizers for Rubber Conveyor Belts - Repair

Repce Vigas

Spot repair beam press.

  • - Available for all kind and all size of belts.
  • - The platen slides to the damage located on the belt.
  • - Automatic control unit.
  • - Water cooled.

Request a Quote
  • Technical Data
  • Further info
  • Accessories
  • Photos
  • Videos
  • Downloads
MaterialAluminium
HeatingHeating Elements - 185º C (365º F) Max.
PressurePressure bag (Air/Water) - 5 Bar (75 PSI)
CoolingWater
Repairable areaUp to 300x300mm

Millimeters Inches

Model Belt (mm) (in)G1 (mm) (in)GCP (mm) (in)G3 (mm) (in)A (mm) (in)B (mm) (in)L (mm) (in)Bottom beam weight (Kg) (Lb)Top beam weight (Kg) (Lb)Platen weight (Kg) (Lb)Total weight (Kg) (Lb)
Repce Vigas 800800 mm200 mm100 mm568 mm300 mm300 mm1260 mm28.36 Kg28.36 Kg6.7 Kg98.12 Kg
Repce Vigas 650650 mm200 mm100 mm568 mm300 mm300 mm1105 mm25.44 Kg25.44 Kg6.7 Kg92.28 Kg
Repce Vigas 10001000 mm200 mm100 mm568 mm300 mm300 mm1465 mm32.66 Kg32.66 Kg6.7 Kg106.72 Kg
Repce Vigas 12001200 mm200 mm100 mm568 mm300 mm300 mm1675 mm38.82 Kg38.82 Kg6.7 Kg119.04 Kg
Repce Vigas 14001400 mm200 mm100 mm568 mm300 mm300 mm1890 mm43.12 Kg43.12 Kg6.7 Kg127.64 Kg
Repce Vigas 16001600 mm200 mm100 mm568 mm300 mm300 mm2100 mm47.32 Kg47.32 Kg6.7 Kg136 Kg
Repce Vigas 2626 in7.9 in3.9 in22.4 in11.8 in11.8 in45.1 in57.8 Lb57.8 Lb14.7 Lb206.6 Lb
Repce Vigas 3232 in7.9 in3.9 in22.4 in11.8 in11.8 in51.5 in65.0 Lb65.0 Lb14.7 Lb221.1 Lb
Repce Vigas 4040 in7.9 in3.9 in22.4 in11.8 in11.8 in60.2 in74.6 Lb74.6 Lb14.7 Lb240.3 Lb
Repce Vigas 4242 in7.9 in3.9 in22.4 in11.8 in11.8 in62.3 in77.0 Lb77.0 Lb14.7 Lb245.2 Lb
Repce Vigas 5454 in7.9 in3.9 in22.4 in11.8 in11.8 in75.7 in96.3 Lb96.3 Lb14.7 Lb283.6 Lb
Repce Vigas 4848 in7.9 in3.9 in22.4 in11.8 in11.8 in68.8 in88.6 Lb88.6 Lb14.7 Lb268.3 Lb

Check all the models

The technical data shown are subject to change without notice.

Description

Beam press for spot repairs on the belt. Aluminium made. Available for several belt widths from 650mm up to 3200mm (superior dimensions under request). The vulcanizer includes pneumatic pressure system, heating system and cooling system. The vulcanizing area is composed by 2 heating platens that hold the heating elements, the temperature probes and the cooling pipes. Quickly removable to make handling easier. Completely automatic process programmed from the control unit (heating, dwell time and cooling).

Controllers

Easy programming. Automatic control of the whole splicing process, once the melting temperature, the dwell time and the cooling temperature have been set. Incorporates one thermometer and one ammeter per section. The ammeter allows the identification of possible problems in the electrical system of the vulcanizer, besides a voltmeter for input voltage reading that allows to detect any problem in the power supply. Automatic end-of-cycle buzzer.

Pressure system

The pressure is applied to the belt by means of a pressure bag (air/water), of the same dimensions of the heating platens. Maximum pressure 7 bar (100PSI).

Heating system

Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.

Cooling System              

Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling system activates automatically after dwell time finishes.

Bolts

Light safety bolts. Inlaid in the beams, allow a perfect assembly of them. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the beam).

Repce Vigas - Vulcanizers for Rubber Conveyor Belts - Repair
Repce Vigas - Vulcanizers for Rubber Conveyor Belts - Repair
Repce Vigas - Vulcanizers for Rubber Conveyor Belts - Repair
Repce Vigas - Vulcanizers for Rubber Conveyor Belts - Repair
Repce Vigas - Vulcanizers for Rubber Conveyor Belts - Repair

No videos currently available

Available Documents
Spec Sheet   View PDF
Catalogue   View PDF
Included    
Optional
Repce Vigas control unit

Repce Vigas control unit

Easy programming. Automatic control of the whole splicing process,...

Further info

Cooling Pump

Cooling Pump

Submersible Pump, for the cooling of the heating...

Further info

10 Bar Compressor

10 Bar Compressor

10 Bar Piston Compressor of small size, with...

Further info

YOU MAY BE ALSO INTERESTED IN

AL20NE

E-Komp

Send us your inquiry and we will contact you as soon as possible.

Name *
Country *
Email *
Phone Number
Message *
Send Close

Please, complete all the required fields *

The e-mail address supplied is not correct.

Contactar