Portable press for edge repair.
- - Aluminium frame for the lowest possible weight.
- - Wide section FONMAR pressure bag.
- - Fully automatic control unit.
- - Water cooled.
Request a Quote
|Heating||185º C (365º F) Max.|
|Pressure||Pressure bag - 7 Bar (100PSI)|
|Repairable area||1400x200mm | 1000x300mm|
|Model||G1 (mm) (in)||GS (mm) (in)||G3 (mm) (in)||A (mm) (in)||B (mm) (in)||D (mm) (in)||L (mm) (in)||Total weight (Kg) (Lb)|
|Repla 1400x200||229 mm||15 mm||442 mm||1400 mm||200 mm||382 mm||1398 mm||97 Kg|
|Repla 1000x300||277 mm||27 mm||551 mm||1000 mm||300 mm||502 mm||900 mm||106 Kg|
|Repla 1400x200||9.02 in||0.59 in||17.40 in||55.12 in||7.87 in||15.04 in||55.04 in||213.40 Lb|
|Repla 1000x300||10.91 in||1.06 in||21.69 in||39.37 in||11.81 in||19.76 in||35.43 in||233.20 Lb|
The technical data shown are subject to change without notice.
Press for edge repair. Aluminium made. Available in different platen dimensions (check availability). Completely automatic process programmed from the control unit (heating, dwell time and cooling).
Easy to program control unit. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. The control box features an Automatic Temperature Regulation System (ATRS), that monitors automatically the differences of temperature between the heating platens during heating and dwell time. By doing so, differences of more than 2ºC are avoided. Includes voltmeter for input voltage reading that allows to detect any problem in the power supply. Includes also a pressure regulator, manometer and pneumatic valve with quick inflation and deflation. Automatic end-of-cycle buzzer.
The pressure is applied to the belt by means of a pressure bag. 7 bar (100PSI) maximum pressure.
Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.
Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling system activates automatically after dwell time finishes.
No videos currently available