Our Products > Vulcanizers for Rubber Conveyor Belts > Workshop > Beta Beta Beta Designed to manufacture rubber parts and for gluing profiles and blocks - Hydraulic pressure by means of cylinders on the lower part. - Adjustable working height for an easy placement of the moulds. - Ongoing works without breaks. - Easy handling by one single operator. - Automatic lifting system. Request a Quote Technical Data Further info Accessories Photos Videos Downloads MaterialSteelHeatingHeating Elements - 200º C (392º F) Max.PressureHydraulic cylinders - 14 Bar (200PSI) Max.CoolingWaterBelt WidthUp to 2000mm (78,7")Platen Length 500 - 750mm - 1000mm (19,6" – 23,6" – 39,3")Angle90º Millimeters Inches Model Belt (mm) (in)G1 (mm) (in)G3 (mm) (in)A (mm) (in)B (mm) (in)L (mm) (in) Beta 2000x10002000 mm1100 mm2260 mm2160 mm1000 mm2900 mmBeta 1800x10001800 mm1100 mm2260 mm1960 mm1000 mm2700 mmBeta 1600x10001600 mm1100 mm2260 mm1760 mm1000 mm2500 mmBeta 1400x10001400 mm1100 mm2260 mm1560 mm1000 mm2300 mmBeta 2000x7502000 mm1100 mm2260 mm2160 mm750 mm2900 mmBeta 1800x7501800 mm1100 mm2260 mm1960 mm750 mm2700 mmBeta 1600x7501600 mm1100 mm2260 mm1760 mm750 mm2500 mmBeta 1400x7501400 mm1100 mm2260 mm1560 mm750 mm2300 mm Beta 2000x100078.74 in43.31 in88.98 in85,03 in39,37 in114.17 inBeta 1800x100070.87 in43.31 in88.98 in77,16 in39,37 in106.30 inBeta 1600x100062.99 in43.31 in88.98 in69,29 in39,37 in98.43 inBeta 1400x100055.12 in43.31 in88.98 in61,41 in39,37 in90.55 inBeta 2000x75078.74 in43.31 in88.98 in85,03 in29,52 in114.17 inBeta 1800x75070.87 in43.31 in88.98 in77,16 in29,52 in106.30 inBeta 1600x75062.99 in43.31 in88.98 in69,29 in29,52 in98.43 inBeta 1400x75055.12 in43.31 in88.98 in61,41 in29,52 in90.55 in The technical data shown are subject to change without notice. Description Steel made workshop press. Available for different belt widths: from 10000mm up to 2200mm. The vulcanizer includes hydraulic pressure system, heating system and cooling system. Composed by 2 parts, top and bottom, both include the heating platens, cooling system and the temperature probes. Lengths of platen available: 500mm, 29”, 39” & 1200mm (20”, 24” y 47”). Completely automatic process programmed from the control unit (heating, dwell time and cooling). Lifting System The bottom platen is lifted up or lowered from the operator control desk. Incorporates a safety system for the blockage of the oil supply if the bolts are not properly placed. The height of the work space may be adjustable in 3 planes (from 0 to 70mm, from 71mm to 190mm and from 191mm to 310mm), depending on the moulds to use. Controllers Easy programming operator control desk. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Also includes voltmeter for input voltage reading that allows to detect any problem in the power supply, ammeters, pressure regulator and manometer. Automatic end-of-cycle buzzer. Pressure system Adjustable and applied by means of hydraulic cylinders connected in series, built in the lower section and from high quality materials. The pressure is supplied to the cylinders by means of a hydraulic kit that automatically regulates the pressure (it recovers the pressure when it lowers and the opposite. Maximum pressure is 14 Bar (200PSI) Heating System Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F. Cooling System Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling and blowing systems (to remove all the water inside the platens) activates automatically after dwell time finishes. Clamping System (option) Fixing the belt by means of automatic clamping bars. Bolts Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press). Available Documents Spec Sheet View PDF Included Optional Control deskEasy programming operator control desk. Automatic control of...Further infoEasy programming operator control desk. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Also includes voltmeter for input voltage reading that allows to detect any problem in the power supply, ammeters, pressure regulator and manometer. Automatic end-of-cycle buzzer. Assited Belt-clampsFixation belt system by means of airbags.