Designed to manufacture rubber parts and for gluing profiles and blocks
- - Hydraulic pressure by means of cylinders on the lower part.
- - Adjustable working height for an easy placement of the moulds.
- - Ongoing works without breaks.
- - Easy handling by one single operator.
- - Automatic lifting system.
Request a Quote
|Heating||Heating Elements - 200º C (392º F) Max.|
|Pressure||Hydraulic cylinders - 14 Bar (200PSI) Max.|
|Belt Width||Up to 2000mm (78,7")|
|Platen Length||500 - 750mm - 1000mm (19,6" – 23,6" – 39,3")|
|Model||Belt (mm) (in)||G1 (mm) (in)||G3 (mm) (in)||A (mm) (in)||B (mm) (in)||L (mm) (in)|
|Beta 2000x1000||2000 mm||1100 mm||2260 mm||2160 mm||1000 mm||2900 mm|
|Beta 1800x1000||1800 mm||1100 mm||2260 mm||1960 mm||1000 mm||2700 mm|
|Beta 1600x1000||1600 mm||1100 mm||2260 mm||1760 mm||1000 mm||2500 mm|
|Beta 1400x1000||1400 mm||1100 mm||2260 mm||1560 mm||1000 mm||2300 mm|
|Beta 2000x750||2000 mm||1100 mm||2260 mm||2160 mm||750 mm||2900 mm|
|Beta 1800x750||1800 mm||1100 mm||2260 mm||1960 mm||750 mm||2700 mm|
|Beta 1600x750||1600 mm||1100 mm||2260 mm||1760 mm||750 mm||2500 mm|
|Beta 1400x750||1400 mm||1100 mm||2260 mm||1560 mm||750 mm||2300 mm|
|Beta 2000x1000||78.74 in||43.31 in||88.98 in||85,03 in||39,37 in||114.17 in|
|Beta 1800x1000||70.87 in||43.31 in||88.98 in||77,16 in||39,37 in||106.30 in|
|Beta 1600x1000||62.99 in||43.31 in||88.98 in||69,29 in||39,37 in||98.43 in|
|Beta 1400x1000||55.12 in||43.31 in||88.98 in||61,41 in||39,37 in||90.55 in|
|Beta 2000x750||78.74 in||43.31 in||88.98 in||85,03 in||29,52 in||114.17 in|
|Beta 1800x750||70.87 in||43.31 in||88.98 in||77,16 in||29,52 in||106.30 in|
|Beta 1600x750||62.99 in||43.31 in||88.98 in||69,29 in||29,52 in||98.43 in|
|Beta 1400x750||55.12 in||43.31 in||88.98 in||61,41 in||29,52 in||90.55 in|
The technical data shown are subject to change without notice.
Steel made workshop press. Available for different belt widths: from 10000mm up to 2200mm. The vulcanizer includes hydraulic pressure system, heating system and cooling system. Composed by 2 parts, top and bottom, both include the heating platens, cooling system and the temperature probes. Lengths of platen available: 500mm, 29”, 39” & 1200mm (20”, 24” y 47”). Completely automatic process programmed from the control unit (heating, dwell time and cooling).
The bottom platen is lifted up or lowered from the operator control desk. Incorporates a safety system for the blockage of the oil supply if the bolts are not properly placed.
The height of the work space may be adjustable in 3 planes (from 0 to 70mm, from 71mm to 190mm and from 191mm to 310mm), depending on the moulds to use.
Easy programming operator control desk. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Also includes voltmeter for input voltage reading that allows to detect any problem in the power supply, ammeters, pressure regulator and manometer. Automatic end-of-cycle buzzer.
Adjustable and applied by means of hydraulic cylinders connected in series, built in the lower section and from high quality materials. The pressure is supplied to the cylinders by means of a hydraulic kit that automatically regulates the pressure (it recovers the pressure when it lowers and the opposite. Maximum pressure is 14 Bar (200PSI)
Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.
Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling and blowing systems (to remove all the water inside the platens) activates automatically after dwell time finishes.
Clamping System (option)
Fixing the belt by means of automatic clamping bars.
Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).
Easy programming operator control desk. Automatic control of...