Beta

Beta - Vulcanizers for Rubber Conveyor Belts - Workshop

Beta

Designed to manufacture rubber parts and for gluing profiles and blocks

  • - Hydraulic pressure by means of cylinders on the lower part.
  • - Adjustable working height for an easy placement of the moulds.
  • - Ongoing works without breaks.
  • - Easy handling by one single operator.
  • - Automatic lifting system.

Request a Quote
  • Technical Data
  • Further info
  • Accessories
  • Photos
  • Videos
  • Downloads
MaterialSteel
HeatingHeating Elements - 200º C (392º F) Max.
PressureHydraulic cylinders - 14 Bar (200PSI) Max.
CoolingWater
Belt WidthUp to 2000mm (78,7")
Platen Length 500 - 750mm - 1000mm (19,6" – 23,6" – 39,3")
Angle90º

Millimeters Inches

Model Belt (mm) (in)G1 (mm) (in)G3 (mm) (in)A (mm) (in)B (mm) (in)L (mm) (in)
Beta 2000x10002000 mm1100 mm2260 mm2160 mm1000 mm2900 mm
Beta 1800x10001800 mm1100 mm2260 mm1960 mm1000 mm2700 mm
Beta 1600x10001600 mm1100 mm2260 mm1760 mm1000 mm2500 mm
Beta 1400x10001400 mm1100 mm2260 mm1560 mm1000 mm2300 mm
Beta 2000x7502000 mm1100 mm2260 mm2160 mm750 mm2900 mm
Beta 1800x7501800 mm1100 mm2260 mm1960 mm750 mm2700 mm
Beta 2000x100078.74 in43.31 in88.98 in85,03 in39,37 in114.17 in
Beta 1800x100070.87 in43.31 in88.98 in77,16 in39,37 in106.30 in
Beta 1600x100062.99 in43.31 in88.98 in69,29 in39,37 in98.43 in
Beta 1400x100055.12 in43.31 in88.98 in61,41 in39,37 in90.55 in
Beta 2000x75078.74 in43.31 in88.98 in85,03 in29,52 in114.17 in
Beta 1800x75070.87 in43.31 in88.98 in77,16 in29,52 in106.30 in

Check all the models

The technical data shown are subject to change without notice.

Description

Steel made workshop press. Available for different belt widths: from 1000mm up to 2200mm. The vulcanizer includes hydraulic pressure system, heating system and cooling system. Composed by 2 parts, top and bottom, both include the heating platens, cooling system and the temperature probes. Lengths of platen available: 500mm, 29”, 39” & 1200mm (20”, 24” y 47”). Completely automatic process programmed from the control unit (heating, dwell time and cooling).

Lifting System

The bottom platen is lifted up or lowered from the operator control desk. Incorporates a safety system for the blockage of the oil supply if the bolts are not properly placed.

The height of the work space may be adjustable in 3 planes (from 0 to 70mm, from 71mm  to 190mm and from 191mm to 310mm), depending on the moulds to use.

Controllers

Easy programming operator control desk. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Also includes voltmeter for input voltage reading that allows to detect any problem in the power supply, ammeters, pressure regulator and manometer. Automatic end-of-cycle buzzer.

Pressure system

Adjustable and applied by means of hydraulic cylinders connected in series, built in the lower section and from high quality materials. The pressure is supplied to the cylinders by means of a hydraulic kit that automatically regulates the pressure (it recovers the pressure when it lowers and the opposite. Maximum pressure is 14 Bar (200PSI)

 

Heating System

Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.

Cooling System

Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling and blowing systems (to remove all the water inside the platens) activates automatically after dwell time finishes.

Clamping System (option)

Fixing the belt by means of automatic clamping bars.

Bolts

Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).

 

Beta - Vulcanizers for Rubber Conveyor Belts - Workshop
Beta - Vulcanizers for Rubber Conveyor Belts - Workshop
Beta - Vulcanizers for Rubber Conveyor Belts - Workshop
Beta - Vulcanizers for Rubber Conveyor Belts - Workshop
Beta - Vulcanizers for Rubber Conveyor Belts - Workshop
Beta - Vulcanizers for Rubber Conveyor Belts - Workshop
Available Documents
Spec Sheet   View PDF
Included    
Optional
Control desk

Control desk

Easy programming operator control desk. Automatic control of...

Further info

Assited Belt-clampsAssited Belt-clampsAssited Belt-clamps

Assited Belt-clamps

Fixation belt system by means of airbags.

Tools for rubber conveyor beltsTools for rubber conveyor beltsTools for rubber conveyor beltsTools for rubber conveyor belts

Tools for rubber conveyor belts

Top quality tools for belt splicing preparation. Further info

Send us your inquiry and we will contact you as soon as possible.

Name *
Country *
Email *
Phone Number
Message *
Send Close

Please, complete all the required fields *

The e-mail address supplied is not correct.

Contactar