All-in-one, the ultimate solution for on-site jobs: comfortable, fast and easy to program.
- - Compact.
- - Air-cooled.
- - 2 dwell levels of temperature.
- - Light and easy to handle. Flight case included.
- - Different electrical configurations available.
- - Wi-Control available.
Request a Quote
|Pressure||Airbag - 2.5Bar (36PSI) Max.|
|Heating||Teflon heating elements - 200º C (392º F) max.|
|Belt Width||Up to 1500mm (59")|
|Platen length||160mm (6,3")|
|Model||Belt (mm) (in)||G1 (mm) (in)||G2 (mm) (in)||G3 (mm) (in)||A (mm) (in)||B (mm) (in)||D (mm) (in)||L (mm) (in)||Lower frame weight (Kg) (Lb)||Upper frame weight (Kg) (Lb)||Total weight (Kg) (Lb)|
|Gamma 400||400 mm||84 mm||118 mm||202 mm||510 mm||160 mm||230 mm||590 mm||14.6 Kg||12 Kg||26.6 Kg|
|Gamma 600||600 mm||84 mm||118 mm||202 mm||710 mm||160 mm||230 mm||790 mm||18.6 Kg||15.8 Kg||34.4 Kg|
|Gamma 800||800 mm||84 mm||118 mm||202 mm||910 mm||160 mm||230 mm||990 mm||22.7 Kg||19.1 Kg||41.8 Kg|
|Gamma 1000||1000 mm||84 mm||118 mm||202 mm||1110 mm||160 mm||230 mm||1190 mm||26.9 Kg||22.5 Kg||49.4 Kg|
|Gamma 1200||1200 mm||84 mm||118 mm||202 mm||1310 mm||160 mm||230 mm||1390 mm||30.9 Kg||26.2 Kg||57.1 Kg|
|Gamma 1500||1500 mm||84 mm||118 mm||202 mm||1610 mm||160 mm||230 mm||1690 mm||36.8 Kg||31 Kg||67.8 Kg|
|Gamma 1500||1500 in||3.3 in||4.6 in||8.0 in||63.4 in||6.3 in||9.1 in||66.5 in||79.2 Lb||68.2 Lb||147.4 Lb|
|Gamma 1200||1200 in||3.3 in||4.6 in||8.0 in||51.6 in||6.3 in||9.1 in||54.7 in||68.0 Lb||57.6 Lb||125.6 Lb|
|Gamma 1000||1000 in||3.3 in||4.6 in||8.0 in||43.7 in||6.3 in||9.1 in||46.9 in||59.2 Lb||49.5 Lb||108.7 Lb|
|Gamma 800||800 in||3.3 in||4.6 in||8.0 in||35.8 in||6.3 in||9.1 in||39.0 in||49.9 Lb||42.0 Lb||92.0 Lb|
|Gamma 600||600 in||3.3 in||4.6 in||8.0 in||28.0 in||6.3 in||9.1 in||31.1 in||41.8 Lb||34.1 Lb||75.9 Lb|
|Gamma 400||400 in||3.3 in||4.6 in||8.0 in||20.1 in||6.3 in||9.1 in||23.2 in||32.1 Lb||26.4 Lb||58.5 Lb|
The technical data shown are subject to change without notice.
Made of aluminium. Available for 6 different widths of belt: 400, 600, 800, 1000, 1200 and 1500mmn. The press includes pneumatic pressure system, heating system and air cooling system, together with a clamping system for the belt. The press is divided into 2 parts (top and bottom); each integrates stainless steel platens with Teflon heating elements and temperature probes. Length of the platen: 160mm. Completely automatic process programmed from the built-in controllers (pressure, heating, dwell time and cooling). The press is supplied with a flight case with 4 multidirectional wheels and a handle.
Built in the frame of the press and easy to program. Automatic control of the whole process of joint, once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Automatic end-of-cycle buzzer.
The pressure is supplied equally by means of a wide section airbag inside the bottom frame. 2,5 Bar maximum pressure (2 bar for GAMMA 1500). All the models include compressor, pressure switch and deaerator.
Fast heating of both platens by means of teflon heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.
The cooling system consists of several high-performance fans placed on the top frame. They activate automatically at the end of the dwell temperature process.
The belt is fixed by means of a clamping bar built-in the frame.
Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).
|Spec Sheet View PDF|
|Catalogue View PDF|
The presses equipped with Wi-Control generates a secure...
Wooden flight case for an easy handling and...