Miniver 2.0

The most efficient manner of joining transmission belts

- Compact size press.

- Locking system with two-hand control.

- Fast cycles for ongoing works.

- Side cooling avoids deformations.

- Narrow perimeter.

- Automatic process.

Request a Quote

Technical Data
Further info
Photos
Accessories
Videos
Downloads

Material	Steel
Heating	200ºC Max.
Pressure	Pneumatic cylinder
Cooling	Water

Millimeters Inches

Model	G1 (mm) (in)	G3 (mm) (in)	A (mm) (in)	B (mm) (in)	D (mm) (in)	L (mm) (in)	Total weight (Kg) (Lb)
Miniver 75	110 mm	730 mm	120 mm	80 mm	160 mm	325 mm	36 Kg
Miniver 150	150 mm	875 mm	200 mm	140 mm	270 mm	465 mm	71 Kg
Miniver 200	180 mm	960 mm	250 mm	200 mm	330 mm	540 mm	115 Kg
Miniver 320	216 mm	984 mm	400 mm	210 mm	340 mm	950 mm	189 Kg
Miniver 520	227 mm	1004 mm	600 mm	210 mm	340 mm	1210 mm	365 Kg
Miniver 75	4.33 in	28.74 in	4.72 in	3.15 in	6.30 in	12.80 in	79.20 Lb
Miniver 150	5.91 in	34.45 in	7.87 in	5.51 in	10.63 in	18.31 in	156.20 Lb
Miniver 200	7.09 in	37.80 in	9.84 in	7.87 in	12.99 in	21.26 in	253 Lb
Miniver 320	8.50 in	38.74 in	15.75 in	8.27 in	13.39 in	37.40 in	Lb
Miniver 520	8.94 in	39.53 in	23.62 in	8.27 in	13.39 in	47.64 in	803.00 Lb

The technical data shown are subject to change without notice.

Description

Steel workshop press for transmission belts. The dimensions of the plates depend on the width of the belt and goes from 10mm up to 520mm, plus a safety margin for the location of the moulds and the heat distribution. The press incorporates pneumatic pressure system (cylinder), heating system (cartridge heaters) and cooling systems (central and double-side one). Composed by frame, pneumatic cylinder, extractable tray, nylon plate and heating plates. Each aluminium plate holds the heaters, temperature probes, central cooling system and double side cooling system. Maximum belt width: 520mm (M520); 320mm (M 320); 200mm (M200); 150mm (M150); 75mm (M75). Length of platen: 210mm (M 520 and M 320); 200 mm (M200); 140 mm (M150); 80 mm (M75). Completely automatic process (heating, dwell time and central and double side cooling) programmed from the control unit.

Controllers

Easy to program control unit. Automatic control of the whole splicing process once the melting temperature of both platens, the dwell time, the cooling temperature (both central and double side ones) and the pressure have been set. Automatic end-of-cycle buzzer.

Pressure System

The pressure is applied equally all along the platen by means of a pneumatic cylinder. Inlet pressure regulator to select the mains pressure. Release/engagement device. Fast inflation/deflation thanks to the selector lever on the back of the control unit. Maximum pressure: 452 daN (M75); 1104 daN (M150); 1810 daN (M200);2209 daN (M320); 3619 daN (M520).

Heating System

Fast heating of both platens by means of interchangeable cartridge heaters that provide a uniform heat distribution all along the platen. Programmable platen up to 200º.

Cooling

Water cooled. The central cooling system (covers the whole platen) favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. It activates and stops automatically. It is composed by a stainless stell closed circuit that makes the water run all along the platen propelled by a water pump. The double side cooling system keeps both ends of the platen at a constant low temperature.

Moulds / Belt clamps

Different option to splice timing belts. Aluminium made moulds with a design perfectly adapted to the shape of the belt for a result identical to the original one.

The belt clamps device allows a perfect adjustment of the flat belt before the splice. Furthermore, a second belt may also be prepared while the machine is working.

Connections

Electrical leads with industrial connectors and silicone water hoses resistant to high temperatures with fit couplings.