Our Products > Vulcanizers for Rubber Conveyor Belts > Repair > Repce Vigas Repce Vigas Repce Vigas Spot repair beam press. - Available for all kind and all size of belts. - The platen slides to the damage located on the belt. - Automatic control unit. - Water cooled. Request a Quote Technical Data Further info Accessories Photos Videos Downloads MaterialAluminiumHeatingHeating Elements - 185º C (365º F) Max.PressurePressure bag (Air/Water) - 5 Bar (75 PSI)CoolingWaterRepairable areaUp to 300x300mm Metric Measurements Imperial Measurements Model Belt (mm) (in)G1 (mm) (in)GCP (mm) (in)G3 (mm) (in)A (mm) (in)B (mm) (in)L (mm) (in)Bottom beam weight (Kg) (Lb)Top beam weight (Kg) (Lb)Platen weight (Kg) (Lb)Total weight (Kg) (Lb) Repce Vigas 800800 mm200 mm100 mm568 mm300 mm300 mm1260 mm28.36 Kg28.36 Kg6.7 Kg98.12 KgRepce Vigas 650650 mm200 mm100 mm568 mm300 mm300 mm1105 mm25.44 Kg25.44 Kg6.7 Kg92.28 KgRepce Vigas 10001000 mm200 mm100 mm568 mm300 mm300 mm1465 mm32.66 Kg32.66 Kg6.7 Kg106.72 KgRepce Vigas 12001200 mm200 mm100 mm568 mm300 mm300 mm1675 mm38.82 Kg38.82 Kg6.7 Kg119.04 KgRepce Vigas 14001400 mm200 mm100 mm568 mm300 mm300 mm1890 mm43.12 Kg43.12 Kg6.7 Kg127.64 KgRepce Vigas 16001600 mm200 mm100 mm568 mm300 mm300 mm2100 mm47.32 Kg47.32 Kg6.7 Kg136 KgRepce Vigas 18001800 mm200 mm100 mm568 mm300 mm300 mm2320 mm53.68 Kg53.68 Kg6.7 Kg148.76 Kg Repce Vigas 2626 in7.9 in3.9 in22.4 in11.8 in11.8 in45.1 in57.8 Lb57.8 Lb14.7 Lb206.6 LbRepce Vigas 3232 in7.9 in3.9 in22.4 in11.8 in11.8 in51.5 in65.0 Lb65.0 Lb14.7 Lb221.1 LbRepce Vigas 4040 in7.9 in3.9 in22.4 in11.8 in11.8 in60.2 in74.6 Lb74.6 Lb14.7 Lb240.3 LbRepce Vigas 4242 in7.9 in3.9 in22.4 in11.8 in11.8 in62.3 in77.0 Lb77.0 Lb14.7 Lb245.2 LbRepce Vigas 4848 in7.9 in3.9 in22.4 in11.8 in11.8 in68.8 in88.6 Lb88.6 Lb14.7 Lb268.3 LbRepce Vigas 5454 in7.9 in3.9 in22.4 in11.8 in11.8 in75.7 in96.3 Lb96.3 Lb14.7 Lb283.6 LbRepce Vigas 6060 in7.9 in3.9 in22.4 in11.8 in11.8 in82.1 in103.4 Lb103.4 Lb14.7 Lb298.1 Lb The technical data shown are subject to change without notice. Description Beam press for spot repairs on the belt. Aluminium made. Available for several belt widths from 650mm up to 3200mm (superior dimensions under request). The vulcanizer includes pneumatic pressure system, heating system and cooling system. The vulcanizing area is composed by 2 heating platens that hold the heating elements, the temperature probes and the cooling pipes. Quickly removable to make handling easier. Completely automatic process programmed from the control unit (heating, dwell time and cooling). Controllers Easy programming. Automatic control of the whole splicing process, once the melting temperature, the dwell time and the cooling temperature have been set. Incorporates one thermometer and one ammeter per section. The ammeter allows the identification of possible problems in the electrical system of the vulcanizer, besides a voltmeter for input voltage reading that allows to detect any problem in the power supply. Automatic end-of-cycle buzzer. Pressure system The pressure is applied to the belt by means of a pressure bag (air/water), of the same dimensions of the heating platens. Maximum pressure 7 bar (100PSI). Heating system Fast heating of the platens by means of heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F. Cooling System Water cooling system composed by a closed stainless steel circuit, that help circulate water all along the platens propelled by a water pump. Water favours a rapid temperature reduction of the belt and reduces waiting time for a new use of the press. Cooling system activates automatically after dwell time finishes. Bolts Light safety bolts. Inlaid in the beams, allow a perfect assembly of them. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the beam). No videos currently available Available Documents Spec Sheet View PDFCatalogue View PDF Included Optional Repce Vigas control unitEasy programming. Automatic control of the whole splicing process,...Further infoEasy programming. Automatic control of the whole splicing process, once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Incorporates one thermometer and one ammeter per platen. The ammeter allows the identification of possible problems in the electrical system of the vulcanizer, besides a voltmeter for input voltage reading that allows to detect any problem in the power supply. Automatic end-of-cycle buzzer. Cooling PumpSubmersible Pump, for the cooling of the heating...Further infoSubmersible Pump, for the cooling of the heating platens (water tank not included). 10 Bar Compressor10 Bar Piston Compressor of small size, with...Further info10 Bar Piston Compressor of small size, with monobloc head, heat protector, fit coupling and pressure reducer.