Gamma

All-in-one, the ultimate solution for on-site jobs: comfortable, fast and easy to program.

- Compact.

- Air-cooled.

- 2 dwell levels of temperature.

- Light and easy to handle. Flight case included.

- Different electrical configurations available.

- Wi-Control available.

Request a Quote

Technical Data
Further info
Accessories
Photos
Videos
Downloads

Material	Aluminium
Pressure	Airbag - 2.5Bar (36PSI) Max.
Heating	Teflon heating elements - 200º C (392º F) max.
Cooling	Air
Belt Width	Up to 1500mm (59")
Platen length	160mm (6,3")
Angle	90º

Metric Measurements Imperial Measurements

All the models may reach up to 2,5 Bar pressure (36PSI), but Gamma 1500, 2 Bar (29PSI) maximum pressure.

Model	Belt (mm) (in)	G1 (mm) (in)	G2 (mm) (in)	G3 (mm) (in)	A (mm) (in)	B (mm) (in)	D (mm) (in)	L (mm) (in)	Lower frame weight (Kg) (Lb)	Upper frame weight (Kg) (Lb)	Total weight (Kg) (Lb)
Gamma 400	400 mm	84 mm	118 mm	202 mm	510 mm	160 mm	230 mm	590 mm	14.6 Kg	12 Kg	26.6 Kg
Gamma 600	600 mm	84 mm	118 mm	202 mm	710 mm	160 mm	230 mm	790 mm	18.6 Kg	15.8 Kg	34.4 Kg
Gamma 800	800 mm	84 mm	118 mm	202 mm	910 mm	160 mm	230 mm	990 mm	22.7 Kg	19.1 Kg	41.8 Kg
Gamma 1000	1000 mm	84 mm	118 mm	202 mm	1110 mm	160 mm	230 mm	1190 mm	26.9 Kg	22.5 Kg	49.4 Kg
Gamma 1200	1200 mm	84 mm	118 mm	202 mm	1310 mm	160 mm	230 mm	1390 mm	30.9 Kg	26.2 Kg	57.1 Kg
Gamma 1500	1500 mm	84 mm	118 mm	202 mm	1610 mm	160 mm	230 mm	1690 mm	36.8 Kg	31 Kg	67.8 Kg
Gamma 1000	1000 in	3.3 in	4.6 in	8.0 in	43.7 in	6.3 in	9.1 in	46.9 in	59.2 Lb	49.5 Lb	108.7 Lb
Gamma 800	800 in	3.3 in	4.6 in	8.0 in	35.8 in	6.3 in	9.1 in	39.0 in	49.9 Lb	42.0 Lb	92.0 Lb
Gamma 600	600 in	3.3 in	4.6 in	8.0 in	28.0 in	6.3 in	9.1 in	31.1 in	41.8 Lb	34.1 Lb	75.9 Lb
Gamma 400	400 in	3.3 in	4.6 in	8.0 in	20.1 in	6.3 in	9.1 in	23.2 in	32.1 Lb	26.4 Lb	58.5 Lb
Gamma 1200	1200 in	3.3 in	4.6 in	8.0 in	51.6 in	6.3 in	9.1 in	54.7 in	68.0 Lb	57.6 Lb	125.6 Lb
Gamma 1500	1500 in	3.3 in	4.6 in	8.0 in	63.4 in	6.3 in	9.1 in	66.5 in	79.2 Lb	68.2 Lb	147.4 Lb

The technical data shown are subject to change without notice.

Description

Made of aluminium. Available for 6 different widths of belt: 400, 600, 800, 1000, 1200 and 1500mmn. The press includes pneumatic pressure system, heating system and air cooling system, together with a clamping system for the belt. The press is divided into 2 parts (top and bottom); each integrates stainless steel platens with Teflon heating elements and temperature probes. Length of the platen: 160mm. Completely automatic process programmed from the built-in controllers (pressure, heating, dwell time and cooling). The press is supplied with a flight case with 4 multidirectional wheels and a handle.

Controllers

Built in the frame of the press and easy to program. Automatic control of the whole process of joint, once the melting temperature of both platens, the dwell time, the cooling temperature and the pressure have been set. Automatic end-of-cycle buzzer.

Pressure system

The pressure is supplied equally by means of a wide section airbag inside the bottom frame. 2,5 Bar maximum pressure (2 bar for GAMMA 1500). All the models include compressor, pressure switch and deaerator.

Heating system

Fast heating of both platens by means of teflon heating elements. Each one is made with an asymmetrical winding to supply an even heat distribution all along the belt. The elements get warmer on the ends to compensate the loss of temperature and avoid heat concentration in the middle. Temperature programable up to 200º C / 392º F.

Cooling System

The cooling system consists of several high-performance fans placed on the top frame. They activate automatically at the end of the dwell temperature process.

Clamping System

The belt is fixed by means of a clamping bar built-in the frame.

Bolts

Easily adjustable to different belt thicknesses. Steel made with safety factor 2 (capable of withstanding twice the maximum load pressure of the press).